PCA826T-CAN2.0A is a high-performance product developed by Rion Technology specially for the high-precision inclination measurement. Before leaving the factory, all products would have full temperature range calibration and compensation, and a two-week long-term stability test ensures compatibility under different working conditions and maintains the best performance indicators during the long-term test cycle. Built-in filtering algorithm makes the product have lower noise and higher response speed. It is CAN2.0A output. The characteristics of non-contact installation make PCA826T easy and convenient to install. You only need to mount the sensor on the surface of the object to be measured with screws, and the horizontal angle of the object can be automatically calculated, which is simple to use. Strong resistance to external electromagnetic interference, strong shock and vibration ability, widely used in satellite communication vehicles, special vehicles, radar antenna vehicles, wind turbines etc.
PCA826T-CAN2.0A | CONDITION | PARAMETERS | UNIT | |||
Measure range |
| ±5 | ±10 | ±30 | ±60 | ° |
Measure axis |
| XY | XY | XY | XY |
|
Resolution |
| 0.0005 | 0.0005 | 0.0005 | 0.0005 | ° |
Measure accuracy | @25℃ | 0.001 | 0.002 | 0.003 | 0.005 | ° |
Zero temp coefficient | -40~85℃ | 0.0002 | 0.0002 | 0.0002 | 0.0002 | °/℃ |
Sensitivity temp. coefficient | -40~85℃ | ≤50 | ≤50 | ≤50 | ≤50 | ppm/℃ |
Power-on start time | <1S | |||||
Response frequency | 20Hz | |||||
Output rate | 5Hz、10Hz、25Hz、35Hz、50Hz、100Hz. Can be set | |||||
Output signal | CAN2.0A | |||||
EMC | According to EN61000 and GBT17626 | |||||
MTBF | ≥50000 hour/time | |||||
Insulation Resistance | ≥100 MΩ | |||||
Shockproof | 100g@11ms、3 Axial Direction (Half Sinusoid) | |||||
Anti-vibration | 10grms、10~1000Hz | |||||
Protection grade | IP67 | |||||
Cables | Standard configuration 1 meter, wear-resistant, wide temperature, shielded cable, mm aviation connector | |||||
Weight | ≤400g (Excluding cable) |
L82×W70×H42mm
L71×W56×H8mm
4 M6 screws
* Please contact the online sales engineer to obtain the product specification of Rion, or email sales@rion-tech.net to obtain it.